NEW DEVELOPMENT 2021 | #16 TOYOTA Yaris GR, 4WD

Oct. 4, 2021

Car and engine specification:

for TOYOTA Yaris GR, 4WD, Type XPA1G, 10/2020--> =>
1.6L Turbo 192 kW (G16E, with GPF)

REMUS RACING-GPF-BACK-SYSTEM

100% stainless steel
Powerful sound
Performance and torque increase
Light weight construction
Made in Austria

INFOBOX:

Racing-GPF-Back-System: 900121 1300 + 900121 1500 + 900121 9999 + tail pipe set! The original exhaust must be cut! No rear skirt modifications required!

The use of racing products and products which do not have EC approval is generally not permitted on public roads

When fitting REMUS sports silencers, cat-back systems and cat replacement pipes designed for use on closed tracks, it is advantageous to carry out an ECU remapping, in order to exploit the optimum performance of the exhaust system and to prevent the check engine from lighting up.

Part Nr.	Description
900121 1300	Racing GPF-back front section replacement tube original tubeØ 65 mm - REMUS tube Ø 70mm no EC type approval Connection to front parts at the manufacturer flange connection. Installation/fitting at the serial mounting points.
900121 1500	Racing Sport exhaust centered for L/R system Installation/fitting at the serial mounting points. Can only be used in combination with front section replacment tube 900121 1300 and set of outlet tubes 900121 9999.. including mounting material no EC type approval
900121 9999	Set of outlet tubes (dual flow) consisting of: 2 outlet tubes with connection Ø 60 mm including mounting material
Choose from following tail pipe package:
0426 80SAR	stainless steel tail pipe set 2 tail pipes Ø 115mm angled (L=145 mm) , chromed, engraved, with adjustable spherical clamp connection
0426 70SGR	stainless steel tail pipe set 2 tail pipes Ø 102 mm angled (L=145 mm) Street Race, straight cut, with adjustable spherical clamp connection
0426 80SABR	stainless steel tail pipe set 2 tail pipes Ø 115 mm angled (L=145 mm), engraved, Black Chrome, with adjustable spherical clamp connection
0426 70CSR	carbon tail pipe set 2 carbon tail pipesØ 102 mm angled (L=145 mm) titanium internals, with adjustable spherical clamp connections

DISCLAIMER

The products of REMUS Innovation GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.

The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.

Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.